HVC802A0 X-Ray Source
●Integrated design with high electrical integration and a compact appearance
●Capable of continuous, uninterrupted operation for extended periods
●High stability
●Can be installed in any orientation
●Standard digital interface RS232, easy to use
- Detail
- Parameters
Product Details
The HVC802A0 X-Ray Source is an exceptionally compact, portable, and reliable line of high voltage X-ray generators. Using in allowable operating ambient temperature, it is capable to self-heat dissipate up to 100W continuous with no additional cooling. The X-ray generator integrates the high voltage inverter, filament supply, X-ray tube and X-ray housing into one unit. The High Voltage X-ray Unit is an 80kV/100W, High Frequency, self-cooled, self-protected & self-contained X-ray generator. It consists of an X-ray tank, and a control box. The Generator is controlled, programmed and monitored via a standard RS232 interface.
Application:
Food testing, industrial non-destructive testing, dangerous goods testing and other fields, mostly used for simple X-ray machines or mobile X-ray testing equipment
Specification:
Item | Specification |
Input voltage | 230VAC±10%, 50/60Hz, 1.2Amps |
Output power of X ray tube | Max continuous output power 100W（80kV/1.25mA,40kv/2.5mA） |
Output voltage | Rated output voltage：Continuously adjustable voltage range 20kV—80kV |
Output voltage ripple：±0.5%（peak to peak） | |
Output voltage accuracy：±1% of voltage setting value | |
line regulation：±0.1% | |
load regulation：±0.1% | |
Tube current | Rated tube current：Continuously adjustable current range 0.2mA-2.5mA |
Tube current accuracy：±1% mA of current setting value | |
line regulation：±0.5% | |
load regulation：±0.5% | |
Rise time of output voltage | The kV rise time is <0.4 Sec from 10% to 90% of the output voltage. |
Filament power supply: | input voltage：24VDC |
filament voltage：2.0 to 3Vac | |
Filament current：3.0 to 3.5 Amps RMS | |
preheating time：3sec | |
Tube feature | Tube type： fixed anode, glass window, tungsten target |
focus：0.8mm | |
inherent filtration：0.8mm Be，0.7mm AI | |
radiation angle：80°*16° fan beam | |
target angle：25° | |
Cooling | transformer oil，natural air cooling |
Working temperatures | -10℃—40℃ |
Storing temperature | -20℃—60℃ |
System temperature protection | 60°C ± 3°C of Oil temperature: |
Humidness | 98%，Non-condensation |
Weight | 23kg |
Installation direction | Installation in any direction |
Radiation angle | 16°×80° |
X-ray leakage | Less than 0.5mR/hr at 5cm from the surface of the HVC802A0. |
JB1/AC~(AC Input Power Connector)
Pin | Signal | Parameter |
1 | L | live wire |
2 | N | Neutral line |
3 | G | PE |
JB2/COM (DMR-9S interface definitions)
Pin | Signal | Parameter |
1.4.6.7.8.9 | N/C | No connect |
2 | TXD | Data transmit |
3 | RXD | Data receive |
5 | GND | Signal gnd |
JB3/Interlock,(DMR-9P interface definitions)
Pin | Signal | Parameter |
3/4/5/6/7/8/9 | N/C | No connect |
1 | Interlock Out | |
2 | Interlock In |
Short connect pin1 and pin2 make X ray source normal operation. Typical connection：
Led indicator
ID | Color | Meaning |
XrayOn | Yellow | indicate X ray on |
ARC | Red | Arcing in oil tank |
OT | Red | Over temperature |
EP_Err | Red | Tube voltage error |
IP_Err | Red | Tube current error |
Power | Green | Power on |
Tank size