HVC1205A0 X-Ray Source
●Compact design, easy installation
●System integrates high-voltage power supply, filament power supply, and control unit
●Self-circulating cooling system
●Versatile installation options
●Standard digital interface for simple application
- Detail
- Parameters
Product Details
The HVC1205A0 is a compact, safe, low-leakage, and electrically stable integrated X-ray source. It can operate continuously at 500W within the allowable temperature range. The maximum output voltage can reach 120kV/500W. The integrated X-ray source mainly consists of a control box and high-voltage oil tank. The system uses RS232 interface for control, monitoring, and firmware upgrades.
Application:
Food testing, industrial non-destructive, security application and other fields.
Specification:
Item | Specification |
Input voltage | 230VAC±10%, 50/60Hz, 4.2Amps |
Output power of X ray tube | Max continuous output power 500W（100kV/5mA or 120kV/4.1mA） |
Output voltage | Rated output voltage：Continuously adjustable voltage range 30kV—120kV |
Output voltage ripple：±0.5%（peak to peak） | |
Output voltage accuracy：±2% of voltage setting value | |
line regulation：±0.1% | |
load regulation：±0.1% | |
Tube current | Rated tube current：Continuously adjustable current range 0.2mA-5.0mA |
Tube current accuracy：±0.2mA of current setting value | |
line regulation：±0.1% | |
load regulation：±0.1% | |
Rise time of output voltage | The kV rise time is <0.6 Sec at maximum power |
The kV rise time is <0.1 Sec at low voltage ( < 40kV ) | |
Filament power supply: | input voltage：24VDC |
filament voltage：3.7Vac | |
filament：3.0 to 3.5 Amps RMS | |
preheating time：3sec | |
Tube feature | Tube type：fixed anode、glass envelope、tungsten target |
focus：0.8mm | |
inherent filtration：0.8mm Be，0.7mm AI | |
radiation angle：80°×36°fan beam | |
target angle：25° | |
Cooling | transformer oil，external circulation，external forced air cooling |
Working temperatures | -10℃—40℃ |
Storing temperature | -20℃—60℃ |
System temperature protection | 60±3℃ of oil temperature |
Humidness | 98%，Non-condensation |
Weight | Oil tank：28.5kg |
Control Unit：3.8kg | |
Installation direction | Installation in any direction |
Radiation angle | 36°×80° |
X-ray leakage | Less than 0.5mR/hr @5cm from the surface of the HVC1205A0. |
JB1/AC~(AC Input Power Connector)
Pin | Signal | Parameter |
1 | L | live wire |
2 | N | Neutral line |
3 | G | PE |
JB2/COM (DMR-9S interface definitions)
Pin | Signal | Parameter |
1.4.6.7.8.9 | N/C | No connect |
2 | TXD | Data transmit |
3 | RXD | Data receive |
5 | GND | Signal gnd |
JB3/Interlock,(DMR-9P interface definitions)
Pin | Signal | Parameter |
3/4/5/6/7/8/9 | N/C | No connect |
1 | Interlock Out | |
2 | Interlock In |
Short connect pin1 and pin2 make X ray source normal operation. Typical connection：
Led indicator:
ID | Color | Meaning |
XrayOn | Yellow | indicate X ray on |
ARC | Red | Arcing in oil tank |
OT | Red | Over temperature |
EP_Err | Red | Tube voltage error |
IP_Err | Red | Tube current error |
Power | Green | Power on |